The polyethylene belt is a type of polyethylene joint used for branching the secondary pipes from the main pipes and pipe repair. These belts are made of two main parts, the lower saddle and the upper saddle, where the branch is formed, which is made of different materials. This product is fastened with the aid of a bolt and a nut around the polyethylene pipe.
For installing the polyethylene belt, at first the two parts of the belt are opened and located around the polyethylene pipe, and then it is fastened with the aid of the bolt and the nut, so that it is fixed around the pipe. Then the part of the polyethylene pipe where the belt navel is located is pierced by a special tool and the connector or a metal is fastened on the belt.
Polyethylene belts have some benefits compared to other materials and are among the most desirable belts. These belts are not damaged by direct sunlight for a long time, and they are resistant to UV rays. These joints are not brittle and have high strength and flexibility. These joints are used in various polymer pipes of different sizes and are widely used in the piping system. The installation and triggering of these joints are easy, and they are cheaply distributed in the market. Polyethylene belts are of co-polymer propylene type and connected by bolts and nuts. These belts are safely waterproofed by plastic O-rings.
The polyethylene belt structure is formed of four parts. Cuff, branch (navel), bolt and nut, washer (O-ring)
Polyethylene belt is available in types of two-bolts, four-bolts, and six-bolts, depending on size.
This product is waterproofed with a plastic O-ring.
Pars Etesal Shargh Company produces and offers various types of polyethylene belts in sizes of 20 to 200 and completely standard from first-grade materials.
If you need consultation and would like more information about the products, you may contact the Pars Etesal Shargh experts through communication channels.
Factory Phone No.: +98 34 33386273
